Nah kali ini saya akan berbagi cara triple booting dengan lilo pada slackware
OS di Tangtop saya ada 3.. ( Slackware, opensuse n Windows ) …*doh..buanyak bngt…hehehe..
Nah, disini saya sarankan jika akan menginstal 3 OS di atas, di mulai dari Windows –> opensuse –>Slackware..
Pengalaman, kl memakai grub, sering g mw masuk grub..jadi harus bolak balik instal grub.. Jadi saya lebih seneng pake lilo… Emang sedikit agak blibet…hehhehe..
Kemudian waktu setting lilo saat instalasi slackware, sebaiknya jangan langsung memasukkan ke tiga OS tsb.. Disarankan hanya memasukkan list Slackware saja..Karena kl langsung biasanya eror lilo-nya .Jadi kita edit lilo-nya secara manual..:D
ok langsung aja… kita ke TKP…:D
kila masuk sebagai root terlebih dahulu…
kemudian cek partisi dengan perintah :
root@thono:~# fdisk -l
Nah, bisa kita liat ada beberapa partisi di leptop kita…
Trus dimane letak OS -nya????…
Nah, di lepi saya tu /dev/sda1 –> OS Windows, /dev/sda2 –> Slackware –>/dev/sda6 –> Ubuntu
Setelah udah tau letak masing-masing OS..kita edit lilo.conf
root@thono:~# pico /etc/lilo.conf
# LILO configuration file
# generated by ‘liloconfig’
#
# Start LILO global section
boot = /dev/sda
#compact # faster, but won’t work on all systems.
# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/slack.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,0,255,0,255,0
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), “spill” (this is how many
# entries must be in the first column before the next begins to
# be used. We don’t specify it here, as there’s just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,27,0,255
# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt
# Append any additional kernel parameters:
append=” vt.default_utf8=0″
prompt
timeout = 300
# VESA framebuffer console @ 1024x768x256
vga = 773
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0 # paranoia setting
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sda2
label = Slackware
read-only # Partitions should be mounted read-only for checking
# Linux bootable partition config ends
#==Baris Yang di Tambahkan Untuk Ubuntu & Windows===
# linux
image = /boot/vmlinuz
root = /dev/sda6
label = Ubuntu
read-write
# windows
other = /dev/sda1
label = Windows
untuk menyimpan tekan ctrl + o
untuk exit tekan ctrl + x
Langkah berikutnya, kita instal lilo nya dengan perintah …
root@fhuw:~# /sbin/lilo -v
LILO version 22.8, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2006 John Coffman
Released 19-Feb-2007 and compiled at 20:09:28 on Feb 14 2010
Warning: LBA32 addressing assumed
Reading boot sector from /dev/sda
Using BITMAP secondary loader
Calling map_insert_data
Mapping bitmap file /boot/slack.bmp
Calling map_insert_file
Boot image: /boot/vmlinuz -> vmlinuz-huge-2.6.33.4
Added Slackware *
Boot image: /boot/vmlinuz -> vmlinuz-huge-2.6.33.4
Added Ubuntu
Boot other: /dev/sda1, on /dev/sda, loader CHAIN
Added Windows
Writing boot sector.
/boot/boot.0800 exists – no boot sector backup copy made.
One warning was issued.
root@fhuw:~#
sipp…Udah jadi nie lilo-nya…..
Setelah itu, reboot Slackware nya..:D
Semoga Bermanfaat…:D
Tidak ada komentar:
Posting Komentar